| PICTURES |
CODE |
VOLT (DC) |
AMPERE |
TERMINAL |
BRACKET |
PROB (LLP41) |
CONNECTION DIAGRAM |
DETAIL |
 |
LLS931 |
12 |
0.5A |
6 |
 |
|
 |
-
Using for checking the liquid level.
-
At every start-up with ignition switch, tests itself for 0.7sec. (warning lamp lights and the signal sounds)
-
When the liquid level decreases below the probe level, warns the driver with a 1 sec. delay.
(delay time is for preventing the effects of waving) |
| LLS932 |
24 |
 |
LLS933 |
24 |
0.3A |
4 |
 |
|
 |
-
Using for checking the liquid level.
-
At every start-up with ignition switch, tests itself for 2-3 sec. (warning lamp lights)
-
When the liquid level decreases below the probe level, warns the driver with a 6-8 sec. delay, by lighting on the warning lamp.
|
| LLS934 |
12 |
|
|
LLS966 |
24 |
0.3A |
4 |
|
|
 |
-
Using for checking the liquid level.
-
At every start-up with ignition switch, tests itself for 2-3 sec. (warning lamp lights)
-
When the liquid level decreases below the probe level, warns the driver with a 1-2 sec. delay, by lighting on the warning lamp.
|
|
LLS963 |
24 |
0.3A |
4 |
|
|
 |
-
Using for checking the liquid level.
-
At every start-up with ignition switch, tests itself for 2-3 sec. (warning lamp lights)
-
When the liquid level decreases below the probe level, warns the driver with a 6-8 sec. delay, by lighting on the warning lamp.
|
|
LLS973 |
24 |
0.3A |
4 |
|
|
|
-
Using for checking the liquid level at water tanks.
-
At every start-up with ignition switch, tests itself for 2-3 sec. (warning lamp lights)
-
When the water completely exhaused, warns the driver with a 6-8 sec. delay, by lighting on the warning lamp.
|
 |
LLP941 |
|
|
|
|
|
|
Using with the liquid level warning system
Made of Ø5mm stainless steel.
The total length changes from 30mm to 370mm according to customer requests. |
